OPRING O-Rings grippers
FEATURES:
This gripper has been especially designed for an easy and efficient assembly of gaskets in their specific seats.
The gripper is equipped with two independent devices which expand the gasket and subsequently eject it so as to assemble it.
The stroke effect pistons control the two devices and therefore the return to the initial position is activated by the springs.
The function is pneumatic.
The dimensions of the gripper are adequate for the assembly of particularly thick gaskets and to position them in seats which are located at a distance from the ends of the part being processed.
The last part of the stroke which allows for the expansion of the gasket can be regulated by means of a special ring.
SPECIFICATIONS:
Model | Article code | Stroke per jaw | Piston stroke | Ejector stroke | Theoretical opening couple per jaw at 6 bar | Working pressure | Weight | |
| ° | mm | mm | Nm | bar | Kg | |||
 | OPR50-1 | OP001ABB | 9° | 17 | 6.5 | 23.5 | 4-8 | 0.7 |
| OPR50-2 | OP002ABC | 9° | 17 | 6.5 | 23.5 | 4-8 | 0.77 |
Model | Article code | Stroke per jaw | Stroke adjustable | Ejector stroke | Theoretical opening force per jaw at 6 bar | Working pressure | Weight | |
| mm | mm | mm | N | bar | Kg | |||
| OPR100 | OP000ABA | 12 | 6.5 | 10 | 280 | 4-8 | 4.1 |
